Types
Technical data
| MEX 5 Corn | |
| Width | 2200 mm |
| Weight with corn header | 2150 kg |
| Height | 4250 mm |
| Height folded down | 2850 mm |
| Weight with grass header | 1760 kg |
| Number of knives max. | 10 pcs. |
| Working width with corn header | 2000 mm |
| Width of maize-header | 2000 mm |
| Working width with grass header | 1900 mm |
| Theoretical chopped length | 5 mm |
| High working position | 4985 mm |
| Coverage | 1,2 ha/h |
| High transport position | 3160 mm |
| Chute length | 3380 mm |
| Power requirement with corn header | 150 - 220 PS |
| Power requirement with grass header | 120 - 220 PS |
| Driveline speed with corn header | 1000 rpm |
| PTO speed | 540 rpm |
| Interchangeable wheels with corn header | 19:19 |
| Interchangeable wheels with grass header | 23:19 |
| Chopping length with corn header | 5 / 7 / 9 mm |
| Chopping length with grass header | 11 / 15 / 19 mm |
| Coverage | 0,8 - 1,2 ha/h |
Dimensions and weights are subject to change due to ongoing technical development, and vary from country to country.
Standard Equipment
MEX 5 corn
| Mounting | Rear 3-point linkage |
| Mounting (optional) | Front |
| Mounting category | Cat. II / Width 2 |
| Mounting | 3 point linkage with cross shaft |
| Drive system | shock-absorbed gearbox for 2 flywheel-speeds |
| Flywheel speed | 800 rpm |
| Flywheel | High-output flywheel with 1220mm diameter centrally adjustable Tungsten carbide-coated harvester knives Built-in grinding unit |
| Penetration | 470mm intake width 4 feed and pre-compression rollers Reversible counter blade 3-fold chopped length adjustment |
| Protection against foreign objects (optional) | Electronic |
| Skim | Protected by friction clutch Hydraulic cylinder for header angle and lifting |
| Corn header | Maize header hydraulic adjustable, linked to chassis Flattened maize auger for difficult harvesting conditions row-independent for 3 rows |
| Grain pulveriser | Proven highly effective grain pulveriser |
| 2 grain cracker plates 10 adjustable, rasped-surface paddles Deflector per knife |
|
| Chute | Hydraulic chute and spout adjustment, full-length arc for consistent flow of crop |
| PTO shaft guarding | C/w freewheel |
| PTO shaft profile | 1 3/8" 6-splines |
| PTO speed corn header | 1000 rpm |
| Operation | Electronic operation Direct Control |
| Hydraulic connection | 1 x Single-acting with free flow return line |
| Electrical connection | 1 x 2-pin Cobo plug |
| Standard equipment includes | Smooth inserts instead of cracker plates for wet corn or grass Warning triangle |
Request further information on this product
