Eurotop Twin Rotor Rakes With Side Swath

Success is in the detail...
Perfectionism teamed with experience in the field – that is the best way to describe the EUROTOP rake range. Pöttinger pays special attention to "clean forage" for high-performance, high-yielding livestock. Careful crop handling is the top priority. Windrowing without contamination or crop disintegration delivers an energy-rich crop and a cost-effective base feed.
Optimised ground hugging and careful forage handling are trademarks of the EUROTOP rotary rake range. Freely-suspended tandem axles, Multitast wheels and pivot-mounted rotors are just a few examples of the technology packed into these machines. Take a look – the success is in the detail.

Types
Technical data

  EUROTOP 651 A multitast EUROTOP 801 A multitast
Working width 6,4 m 6,7 - 7,6 m
Working width adjustment   Hydraulic 
Rotor diameter   3,15 m
Rotor diameter rear / front 3,15/2,98   
Transport width 2,85 m 2,85 m
Transport length 7,9 m 7,9 m
Parking height without tine arms removed 4,1 m 4 m
Parking height with tine arms removed 3,44 m 3,4 m
Tine arms per rotor rear / front 12 / 10  12 / 12 
Removable tine carrier arms per rotor 12 pcs. 12 pcs.
Tines per tine arm 4 pcs. 4 pcs.
Weight 1770 kg 1890 kg
Mounting Trailed hydraulic folding  Trailed hydraulic folding 
Main wheels Rigid  Rigid 
Tyres - chassis 260/70-15,3  260/70-15,3 
Swath placement in direction of travel Left  Left 
Height adjustment system Hand crank  Hand crank 
Axle (standard) Single axle  Tandem axle 
Rotor tyres (standard) 16 x 6,5-8  16 x 6,5-8 
Jockey wheels Multitast wheel  Multitast wheel 
Wide angle P.T.O. Wide-angle PTO shaft on one side  Wide-angle PTO shaft on one side 

 

  TOP 722 TOP 812
Working width 6,8 - 7,6 m 7,6 m
Rotor diameter 3,3 m 3,7 cm
Rotor diameter rear / front    
Transport width 2,52 m 2,8 m
Transport height 3,99 m 3,99 m
Transport length 8,9 m 9,7 m
Parking height without tine arms removed 3,99 m 3,99 m
Parking height with tine arms removed 3,6 m 3,6 m
Tine arms per rotor 13 pcs. 13 pcs.
Tine arms per rotor rear / front    
Removable tine carrier arms per rotor 13 pcs. 13 pcs.
Tines per tine arm 4 pcs. 4 pcs.
Weight 2500 kg 2650 kg
Swath placement in direction of travel Right  Right 
Height adjustment system Hand crank  Hand crank 
Axle (standard) Tandem axle  Tandem axle 
Rotor tyres (standard) 16 x 6,5-8  16 x 6,5-8 
Jockey wheels Jockey wheel inside rotor arc  Jockey wheel inside rotor arc 
Wide angle P.T.O. Wide-angle PTO shaft on both sides  Wide-angle PTO shaft on both sides 

 

  EUROTOP 611 A EUROTOP 691 A tandem
Working width 3,4 - 6,2 m 4,2 - 6,9 m
Working width adjustment Hydraulic  Hydraulic 
Rotor diameter 2,98 m 3,28 m
Rotor diameter rear / front    
Transport width 2,1 m 2,4 m
Transport length 7,1 m 7,7 m
Tine arms per rotor 12 pcs. 12 pcs.
Tine arms per rotor rear / front    
Removable tine carrier arms per rotor 12 pcs. 12 pcs.
Tines per tine arm 4 pcs. 4 pcs.
Weight 1400 kg 1550 kg
Mounting Trailed hydraulic folding  Trailed hydraulic folding 
Main wheels Rigid  Rigid 
Swath placement in direction of travel Left or 2 swaths  Left or 2 swaths 
Height adjustment system Turnbuckle  Turnbuckle 
Axle (standard) Single axle  Tandem axle 
Rotor tyres (standard) 18,5 x 8,5-8  18,5 x 8,5-8 
Wide angle P.T.O. Wide-angle PTO shaft on one side  Wide-angle PTO shaft on one side

 

Dimensions and weights are subject to change due to ongoing technical development, and vary from country to country.
 
Standard Equipment

EUROTOP

Mounting Trailed hydraulic folding
Mounting option Three point linkage c/w enclosed lower link pins
Mounting category Cat. II / Width 2
PTO shaft guarding with cam clutch
PTO shaft profile 1 3/8" 6-splines
Hydraulic connection 1 x single-acting for the lifting system
1 x double-acting for the working width adjustment
Electrical connection 1 x 7-pin lighting plug for warning signs with lighting
Standard equipment includes Operator's manual
Spare parts list

 

TOP

Mounting category Cat. II / Width 2
Hydraulic connection 1 x double-acting for the lifting system
1 x double-acting for the hydraulic side-shift system
Electrical connection 1 x 7-pin lighting plug for warning signs with lighting

 

EUROTOP

Mounting Trailed hydraulic folding
Mounting option Bar between lower linkages
PTO shaft guarding with cam clutch
PTO shaft profile 1 3/8" 6-splines
Hydraulic connection 1 x single-acting for the lifting system
1 x double-acting for the working width adjustment
Electrical connection 1 x 7-pin lighting plug for warning signs with lighting
Standard equipment includes Operator's manual
Spare parts list

 

Download Brochures:
EUROTOP Rotary rakes
TOP Twin rotor rakes with side swath

Request further information on this product