Designed for small to medium sized tractors from 20 kw (28 hp) up to 60 kw (83 hp). The 1.5 ton linkages are integrated into the design of the tractor providing all the benefits of their large counterparts. This linkages has a lifting capacity of 1.5 ton, measured in quick-couplings.
Standard equipment:
- Single acting hydr. with air filter on lowering side.
- Cat. 2, DS/ISO 8759/1/2, 825 mm between the lift arms' balls.
- Cleaned and painted with a two-component primer and finaly painted in the tractor's colour - two component.
- Adapted to the individual tractor model.
- Chassis bolts & 5.5 m hydr. hoses with couplings.
- Stop valve device on hydr hose at tractor connection, the lift can then be locked.
- Quick-coupling for lift arms, cat. 2-S with ø28 mm balls.
- Top link ø25 mm and pin with parking device for the lift arms' balls.
- For several models: direct hydr. connection. Look after * in "Tractor Makes / Model List".
Adjustment of the locking pin for lift arms
 |
 |
 |
 |
| Pos. 1 The lift arms are locked. No mutual movability. |
Pos. 2 Turn the locking pin 1/4 turn. Then there is mutual movability, however limited. |
Pos. 3 Remove the locking pin to achieve full movability. Without limitation. |
Pos. 4 Put up the arms if the front-lift is not used for a period of some duration. |
Download Brochure
Download Operating Instructions / Spare Parts List
Download Technical Specifications
Request further information on this product
